How much do you Flexo printing machine?

Flexo printing machine uses fluid ink with strong fluidity. The ink is transferred from the ink fountain rubber roller and anilox transfer roller to the graphic part of the printing plate and makes it inked, and then the printing pressure is applied by the pressure roller to ink is transferred to the substrate, and finally the printing process is completed by the drying surface.

What is the craft difference between Flexo printing machine and book printing?

What is the difference in functions between Flexo printing machine and book printing?

What is the function of the drying part of the Flexo printing machine?

What is the craft difference between Flexo printing machine and book printing?

1. Flexo printing machine: Use liquid ink with a strong flow capacity. The colour is transferred and colored from the colour box and grid transfer roller to the graphical part of the printing plate. Then the pressure is applied by the pressure roller for printing. The paint on the plate is transferred to the substrate and finally the printing process is completed by the drying surface.

2. Book printing machine: The printing process for the use of lead plates and light sensitive resin plates is: Preparation before the plate installation

What is the difference in functions between Flexo printing machine and book printing?

1. Flexo printing machine: The machine is easy to build so that it is easy to operate and wait. The price of a flexographic printing machine having the same function shall be approximately 30-50% of the price of an offset printing machine or a low-pressure machine; The base material is highly adaptable and satisfactory printing results can be obtained from a 0,22 mm plastic film up to a 10 mm corrugated board.

2. Book printing machine: The back of the printed matter is slightly printed and raised, the lines or edges are clean and the printing colour appears bright in the middle part and the raised edges are heavier, so that light printing can occur. Arched. The ink is thicker (the thickness of the ink layer is approximately 7m m). Can be printed on rougher substrates. Tonal reproducibility is average.

What is the function of the drying part of the flexographic printing machine?

The belt length between the two parts (units) of the flexographic printing machine is 250-400 m m, and the flexographic printing speed generally reaches 150 m/min, which means that the time, The drying system is only a fraction of the time. Therefore, the drying system of the flexographic printing machine requires a good drying efficiency.

The drying device of the flexographic printing machine is divided into two levels: the first level is the intermediate drying, i.e. the front colour layer is dried as completely as possible before entering the next printing plant and the second is the last drying, i.e. all inks of each colour are printed. After completion, remove the solvent thoroughly in the colour layer to avoid greasing during wrapping or stacking.

Flexo printing machine has various Flexo printing machines that can provide the increasing of products, and make them more effective, reliable, and consistent.