How can we use the bag making machine?

The bag making machine is widely used in the modern packaging industry, and it can produce most of the packaging bags needed on the market.

What is a bag making machine?

As the name suggests, the heat sealing and hot cutting bag making machine is to heat seal a knife first, and then cut it. The cut edge is heat sealed. The made vest bag is equivalent to double insurance, because the commonly used vest bags in supermarkets are heat sealing and hot cutting vest bags. It is a special machine for vest bag.

The heat sealing and cold cutting bag making machine is to heat seal a knife first, and then cut it with a cold knife. The cut edge is open. In addition to being used in the production of vest bags, it can also be used in the production of flat bags by replacing the double line sealing knife with the single line sealing knife. Because its cutting edge is open.

Where is the scope of use of bag making machine?

1. The eager cutting machine is generally used for production: garment bags (that is, the kind with a double-sided tape)

2. Heat-sealing and cold-cutting machines are generally produced: flat bags (translucent bags you put on when you buy fans and induction cookers)

3. Heat-sealing and eager-cutting machines generally produce: T-shirt bags (also called vest bags, handbags, convenient bags, etc.)

What are the components of a bag making machine?

1. Adjustment of the distance between the welding wire and the cutting line: The distance between the welding wire of the bag making machine and the cutting line is generally 5-10mm. Turn the hand wheel on the adjusting frame to make the beam roller rise or fall a certain distance to obtain the ideal cutting Tangent. In order to facilitate the observation of the quality of the welding wire, the position of the welding wire of the single bottom wire can be adjusted to the outer end of the machine cutter. If the welding line and the bottom line are not parallel, loosen the fixing screw of a bevel gear, turn the handwheel to raise or lower one end of the beam roller; after the production is stable, lock the screw of the gear again.

2. Welding knife adjustment method: Put a piece of thin paper on the support seat of the bag making machine, turn the big handwheel in the machine body box by hand to make the welding knife at the bottom dead center, loosen the nut and adjust the nut, and try it by hand. Pull the tightness of both ends of the tissue until it is approximately equal. After the adjustment, the nuts should be tightened to prevent loosening.

3. Automatic light control feeding device: The bag making machine is composed of servo motor, feeding rubber roller, light control shutter, shutter, photoelectric tracking machine and electric control line.

If you want to get more information about the bag making machine, please connect ZHEJIANG GREENPRINT MACHINERY CO.,LTD. They will be very pleased to help you.